Ngwaahịa
Tungsten Carbide Alloy Nkume ịkpụ mma
Nkọwa
-
Njirimara nke tungsten carbide ihe
- Isi ike dị elu:
- Isi ike nke tungsten carbide dị oke elu, nke abụọ na dayamọnd, nke na-enye ya oke nguzogide iyi. N'oge a na-eji valvụ ahụ eme ihe, ọ nwere ike iguzogide mmebi na iyi nke ọkara, na-agbatị ndụ ọrụ nke valvụ ahụ.
- Nguzogide corrosion:
- Tungsten carbide nwere akụrụngwa kemịkalụ kwụsiri ike na ọ naghị eme ngwa ngwa na mgbasa ozi corrosive dị ka acid, alkali, nnu, wdg. Enwere ike iji ya ogologo oge na gburugburu ebe na-emebi emebi na-emebi emebi.
- Nguzogide okpomọkụ dị elu:
- Ebe mgbaze nke tungsten carbide dị elu dị ka 2870 ℃ (nke a makwaara dị ka 3410 ℃), nke nwere ezigbo nguzogide okpomọkụ dị elu ma nwee ike ịnọgide na-arụ ọrụ kwụsiri ike n'okpuru ọnọdụ okpomọkụ dị elu.
- Ike dị elu:
- Tungsten carbide nwere ike dị elu ma nwee ike iguzogide nrụgide dị ukwuu na ike mmetụta, na-eme ka ọrụ valves kwụsie ike n'okpuru ọnọdụ ọrụ siri ike.
-
Njirimara nke tungsten carbide stone cutter
- Isi ike dị elu:
- Tungsten carbide (WC) nwere ike siri ike nke ukwuu, na-eme ka ọ dịrị ndị na-egbutu nkume tungsten carbide mfe ijikwa okwute nke siri ike dị iche iche, na-eme ka usoro igbutu dị larịị.
- Nguzogide iyi dị mma:
- N'ihi ịdị elu nke tungsten carbide, ndị na-egbu osisi tungsten carbide nwere ike ịnọgide na-arụ ọrụ nke ọma n'oge a na-eji ogologo oge eme ihe, na-adịghị adị mfe na-eyi, ma si otú ahụ gbasaa ndụ ọrụ nke ngwá ọrụ ahụ.
- Nkwụsi ike kemịkalụ siri ike:
- Tungsten carbide nwere akụrụngwa kemịkalụ kwụsiri ike na ọ naghị emeghachi omume na ọtụtụ ihe kemịkalụ, nke na-ahụ na arụmọrụ nke tungsten carbide cutters agaghị emetụta mmeghachi omume kemịkal mgbe ị na-egbutu nkume.
- Ịrụ ọrụ nke ọma:
- Ndị na-egbutu nkume tungsten carbide nwere arụmọrụ dị mma, nke nwere ike igbutu nkume ngwa ngwa na nke ọma ma melite arụmọrụ nhazi.
-
Uru nke tungsten carbide Stone Cutter
- Na-emeziwanye arụmọrụ ịkpụ:
- Nnukwu ike na iyi nguzogide nke tungsten carbide stone cutters na-enyere ha aka ịnọgide na-arụ ọrụ ọsọ ọsọ mgbe ị na-egbutu nkume, si otú ahụ na-emeziwanye arụmọrụ ịkpụ ma na-ebelata usoro nhazi.
- Belata ụgwọ nhazi:
- N'ihi ogologo ndụ ọrụ nke tungsten carbide stone cutters, a na-ebelata ugboro ole ngbanwe ngwá ọrụ, si otú a na-ebelata ọnụ ahịa nhazi. Ka ọ dị ugbu a, arụmọrụ ya dị mma na-enyekwara aka belata mkpofu nkume ma nwekwuo uru akụ na ụba.
- Gbaa mbọ hụ na nhazi ogo:
- Arụ ọrụ mbelata nke ọma na nguzogide dị mma nke ndị na-egbu osisi tungsten carbide na-enyere ha aka ịnọgide na-enwe mmetụta dị oke mma mgbe ị na-egbutu nkume, na-ahụ na nhazi nhazi.
- Ngwa zuru oke:
- Ndị na-egbu osisi tungsten carbide abụghị naanị maka nkume siri ike dị iche iche, kamakwa maka nhazi nkume nke ụdị dị iche iche na nha dị iche iche, nke nwere nnukwu mgbanwe.
Tebụl arụmọrụ ihe
| Ọkwa Cobalt Binder | ||||||||||||
| Ọkwa | Ihe mejupụtara(% n'ịdị arọ) | Njirimara anụ ahụ | Nha ọka (μm) | Dakọtara to ulo | ||||||||
| Njupụta g/cm³(±0.1) | Isi ikeHRA (± 0.5) | TRS Mpa(nkeji) | Porosity | |||||||||
| WC | Ni | Ti | TaC | A | B | C | ||||||
| KD115 | 93.5 | 6.0 | - | 0.5 | 14.90 | 93.00 | 2700 | A02 | B00 | C00 | 0.6-0.8 | YG6X |
| KD335 | 89.0 | 10.5 | - | 0.5 | 14.40 | 91.80 | 3800 | A02 | B00 | C00 | 0.6-0.8 | YG10X |
| KG6 | 94.0 | 6.0 | - | - | 14.90 | 90.50 | 2500 | A02 | B00 | C00 | 1.2-1.6 | YG6 |
| KG6 | 92.0 | 8.8 | - | - | 14.75 | 90.00 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG8 |
| KG6 | 91.0 | 9.0 | - | - | 14.60 | 89.00 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG9 |
| KG9C | 91.0 | 9.0 | - | - | 14.60 | 88.00 | 3200 | A02 | B00 | C00 | 1.6-2.4 | YG9C |
| KG10 | 90.0 | 10.0 | - | - | 14.50 | 88.50 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG10 |
| KG11 | 89.0 | 11.0 | - | - | 14.35 | 89.00 | 3200 | A02 | B00 | C00 | 1.2-1.6 | YG11 |
| KG11C | 89.0 | 11.0 | - | - | 14.40 | 87.50 | 3000 | A02 | B00 | C00 | 1.6-2.4 | YG11C |
| KG13 | 87.0 | 13.0 | - | - | 14.20 | 88.70 | 3500 | A02 | B00 | C00 | 1.2-1.6 | YG13 |
| KG13C | 87.0 | 13.0 | - | - | 14.20 | 87.00 | 3500 | A02 | B00 | C00 | 1.6-2.4 | YG13C |
| KG15 | 85.0 | 15.0 | - | - | 14.10 | 87.50 | 3500 | A02 | B00 | C00 | 1.2-1.6 | YG15 |
| KG15C | 85.0 | 15.0 | - | - | 14.00 | 86.50 | 3500 | A02 | B00 | C00 | 1.6-2.4 | YG15C |
| KD118 | 91.5 | 8.5 | - | - | 14.50 | 83.60 | 3800 | A02 | B00 | C00 | 0.4-0.6 | YG8X |
| KD338 | 88.0 | 12.0 | - | - | 14.10 | 92.80 | 4200 | A02 | B00 | C00 | 0.4-0.6 | YG12X |
| KD25 | 77.4 | 8.5 | 6.5 | 6.0 | 12.60 | 91.80 | 2200 | A02 | B00 | C00 | 1.0-1.6 | P25 |
| KD35 | 69.2 | 10.5 | 5.2 | 13.8 | 12.70 | 91.10 | 2500 | A02 | B00 | C00 | 1.0-1.6 | P35 |
| KD10 | 83.4 | 7.0 | 4.5 | 4.0 | 13.25 | 93.00 | 2000 | A02 | B00 | C00 | 0.8-1.2 | M10 |
| KD20 | 79.0 | 8.0 | 7.4 | 3.8 | 12.33 | 92.10 | 2200 | A02 | B00 | C00 | 0.8-1.2 | M20 |
| Nickel Binder akara ule | |||||||||||
| Ọkwa | Ihe mejupụtara(% arọ) | Njirimara anụ ahụ | Dakọtara to ulo | ||||||||
| Njupụta g/cm3 (± 0.1) | Isi ike HRA (± 0.5) | TRS Mpa(nkeji) | Porosity | Mkpụrụ ọka (μm) | |||||||
| WC | Ni | Ti | A | B | C | ||||||
| KDN6 | 93.8 | 6.0 | 0.2 | 14.6-15.0 | 89.5-90.5 | 1800 | A02 | B00 | C00 | 0.8-2.0 | YN6 |
| KDN7 | 92.8 | 7.0 | 0.2 | 14.4-14.8 | 89.0-90.0 | 1900 | A02 | B00 | C00 | 0.8-1.6 | YN7 |
| KDN8 | 91.8 | 8.0 | 0.2 | 14.5-14.8 | 89.0-90.0 | 2200 | A02 | B00 | C00 | 0.8-2.0 | YN8 |
| KDN12 | 87.8 | 12.0 | 0.2 | 14.0-14.4 | 87.5-88.5 | 2600 | A02 | B00 | C00 | 0.8-2.0 | YN12 |
| KDN15 | 84.8 | 15.0 | 0.2 | 13.7-14.2 | 86.5-88.0 | 2800 | A02 | B00 | C00 | 0.6-1.5 | YN15 |
Dee ozi gị ebe a ziga anyị ya
